Setting The Energy Saver Modes - Oki CX4545 MFP Management Manual

2 SETTING ITEMS (ADMIN)
 Setting the energy saver modes
The following energy saver modes are available in this menu.
 Weekly timer
Using the built-in weekly timer, you can have the equipment automatically turned ON and OFF at specified times. For
instance, you can set the timer for the starting time and closing time of your office so that the copier will automatically
turn itself ON and OFF at those specified times.
 You can turn on the power by simply pressing the [START] button on the control panel when the device is in the
Sleep or Super Sleep mode by the weekly timer.
 When the power switch is turned off, the weekly timer does not work.
 Auto Power Save mode
This function allows the equipment to automatically go into the energy saver mode if it is left inactive for a certain
period of time.
 Sleep mode/Super Sleep mode
This function puts the equipment into the Sleep or Super Sleep mode if it is left inactive for a certain period of time. In
the Sleep or Super Sleep mode, power to the unused sections of this equipment is shut off while this equipment is in
the standby status. Power consumption in the standby status becomes smallest in the Super Sleep mode. In the
standby status, power consumption in the Sleep mode is larger than that in the Super Sleep mode but is smaller than
that in the Auto Power Save mode.
For the types of Energy Saver modes and procedures for entering each mode, refer to the Quick Start Guide
"Chapter 1: PREPARATIONS".
Neither the [AUTO POWER SAVE] nor [SLEEP/SUPER SLEEP] button is displayed in the European version.
Contact your service representative to change the default setting for each button.
1
Press [GENERAL] in the ADMIN menu (1/2).
The GENERAL menu (1/2) is displayed.
To display the ADMIN menu, see the following page:
 P.71 "Entering Admin Menu"
84 Setting General Functions