2 SETTING ITEMS (ADMIN)
3
Press the desired Ethernet speed button, then press [OK].
For ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFP
When you select a specific Ethernet speed, you must select the same Ethernet speed as set in the
connected network. If you do not know the Ethernet speed that must be used, select [AUTO].
The current Ethernet speed is displayed above the buttons.
If the network is not stable, power OFF the equipment and then power it back ON.
For ES9160 MFP/ES9170 MFP
When you select a specific Ethernet speed, you must select the same Ethernet speed as set in the
connected network. If you do not know the Ethernet speed that must be used, select [AUTO (-100MB)] or
[AUTO (-1000MB)].
This equipment does not enter the Super Sleep mode even if [ENABLE] is selected in the SLEEP/SUPER
SLEEP screen when ETHERNET is set to [AUTO (-1000MB)] or [1000BASE FULL].
The current Ethernet speed is displayed above the buttons.
If the network is not stable, power OFF the equipment and then power it back ON.
150
Setting Network Functions