Oki CX4545 MFP Management Manual page 77

2.SETTING ITEMS (ADMIN)
3
Specify the following items as required and press [OK].
[LOCATION] — Press this button to enter the location of this equipment.
[SERVICE PHONE NUMBER] — Press this button to enter the service call number.
[CONTACT INFORMATION] — Press this button to enter the name of the service technician.
[ADMIN. MESSAGE] — Press this button to enter an administration message for users.
The following table shows the number of characters you can enter into each box.
[LOCATION]
[SERVICE PHONE NUMBER]
[CONTACT INFORMATION]
[ADMIN. MESSAGE]
 When you press each button (excluding [SERVICE PHONE NUMBER]), the on-screen keyboard is
displayed. Enter the value using the on-screen keyboard and press [OK] to set the entry. You can also use
the digital keys on the control panel to enter numerals.
 When you press [SERVICE PHONE NUMBER], the following on-screen keyboard for entering the fax
number will be displayed. Press [Pause] to enter "-" in [SERVICE PHONE NUMBER]. If you enter "-" in
them, a three- second pause is added for dialing the fax number.
You can also use the digital keys on the control panel to enter fax numbers.
Item
Up to 64 characters can be entered.
Up to 32 numbers can be entered.
Up to 64 characters can be entered.
Up to 20 characters can be entered.
The number of characters
Setting General Functions
2 SETTING ITEMS (ADMIN)
75