Oki CX4545 MFP Management Manual page 140

2 SETTING ITEMS (ADMIN)
4
Specify the following items as required and press
ENABLE DHCP (IP Address) — Select whether or not the IPv6 address issued by the DHCPv6 server is used for
this equipment. Press [ENABLE] to use the address, or [DISABLE] not to use it.
ENABLE DHCP (OPTIONS) — Select whether or not the optional information (IPv6 address for the DNS server,
etc.), except the IPv6 address for this equipment, which is issued from the DHCPv6 server, is used on this
equipment. Press [ENABLE] to use the information, or [DISABLE] not to use it.
FQDN Option — Press [ENABLE] to use DNS for setting FQDN (Fully Qualified Domain Name), or [DISABLE] not
to use it for setting FQDN.
FQDN Update Method — Press [CLIENT] to update DNS from the equipment, or [SERVER] to update DNS from
the DHCPv6 server.
Either the [ENABLE DHCP (IP Address)] option or the [ENABLE DHCP (OPTIONS)] option must be in
[ENABLE].
5
Confirm the settings and press [OK].
You will be returned to the NETWORK menu.
IPv6 address obtained from the DHCPv6 server is displayed.
138 Setting Network Functions
.