Error Messages - Oki CX4545 MFP Management Manual

2.SETTING ITEMS (ADMIN)
 Error messages
The following error messages may be displayed on the touch panel.
[802.1X] Auth Server/Switch couldn't be contacted
[802.1X] Authentication failed
Certificate verification Failure
Message Cause
 The RADIUS server service is stopped.
 Configuration for the RADIUS server is not correct.
 The IEEE 802.1X switch has problem.
 The username or password that the user entered is not
correct.
 The certificates uploaded are wrong.
 A CA certificate is not installed in the equipment.
 The installed CA certificate is not valid.
 The server certificate is invalid.
IEEE 802.1X Authentication Setting
2 SETTING ITEMS (ADMIN)
205