Oki CX4545 MFP Management Manual page 32

1 SETTING ITEMS (USER)
3
Press the drawer portion in the illustration to highlight the drawer whose paper type
you want to change, and press the desired paper type button, and then press [OK] to
save the settings.
For ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFP
You can select either [RECYCLED PAPER], [THICK1], [THICK2], or [THICK3] for the paper type.
For ES9160 MFP/ES9170 MFP
You can select [THICK1] for the paper type.
 For details of the paper types, refer to the Copying Guide "Chapter 1: BEFORE USING EQUIPMENT".
 You can select either [INSERT], [COVER], [SPECIAL] or [FAX] to restrict the uses for a specific job. For
example, if you select [INSERT] for a drawer, the paper in the drawer is always used for copy insertion.
 When the thickness "THICK 1, 2 or 3" (THICK 1 only for the ES9160 MFP/ES9170 MFP), or an attribute
other than "NONE" is set for a drawer, the paper placed in this drawer will not be used for Automatic Paper
Selection (APS).
For details of APS, refer to the Copying Guide "Chapter 3: BASIC COPY MODES".
 When an attribute other than "NONE" is set for a drawer, the Automatic Change of Paper Source function is
disabled for the paper in this drawer.
For details of this function, see the following page:
 P.158 "Setting Copy Functions"
30 Setting Drawer