Oki CX4545 MFP Management Manual page 161

2.SETTING ITEMS (ADMIN)
3
Specify the following items as required, and press
AUTOMATIC CHANGE OF PAPER SOURCE — Selecting [ON] for this function allows the equipment to feed the
same size of paper from a different drawer even if the specified drawer from which paper is being fed is empty.
This function is always enabled when copy operations are performed using Automatic Paper Selection (APS). To
learn more about APS, refer to the Copying Guide "Chapter 3: BASIC COPY MODES".
When an attribute other than "NONE" is set for a drawer, the Automatic Change of Paper Source function is
disabled for the paper in this drawer.
For instructions on how to verify and/or change an attribute for a drawer, see the following page:
 P.29 "Setting Drawer"
PAPER OF DIFFERENT DIRECTION — Selecting [ON] for this function allows the equipment to feed the same
size of paper that is set in a different direction if the drawer from which paper is being fed is empty.
Paper feeding when the drawer is out of paper during copying is as follows:
This is an example when the drawer for feeding paper is automatically changed while data is being copied on
A4-size paper.
AUTOMATIC CHANGE OF
PAPER SOURCE
ON
ON
OFF
OFF
SUSPEND PRINTING IF STAPLER EMPTY — When the stapler is empty during stapling in other than the saddle
stitch mode, you can select whether to stop printing or not.
Selecting [ON] stops the job with stapling, while selecting [OFF] continues the job without stapling.
If the stapler is empty in the saddle stitch mode, printing stops.
DEFAULT MODE OF AUTO COLOR — Press the default color mode for auto color.
[DEFAULT MODE OF AUTO COLOR] is available only for the ES9460 MFP/ES9470 MFP/CX3535 MFP/
CX4545 MFP.
Options
PAPER OF DIFFERENT
DIRECTION
ON
OFF
ON
OFF
.
Paper Feeding
Using Automatic Paper
Selection (APS)
A4 and A4-R paper are fed.
A4 paper is fed.
—
—
Setting Copy Functions
2 SETTING ITEMS (ADMIN)
Specifying the drawer
manually
A4 and A4-R paper are fed.
A4 paper is fed.
—
—
159