Searching For Trace Data - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS
2.6.9.6

Searching for Trace Data

This section explains how to search for trace data.
■ Searching for Trace Data
The specified address or frame number in trace data can be displayed.
The following two methods are available to search for trace data: using GUI (window or dialog) and using
only the command. The same result is obtained from both methods.
● Using GUI for Searching for Trace Data
1. Display the trace window.
- Select [View] - [Trace] menu.
2. Specify the address or frame number to search for trace data.
- Right-click on the trace window, and select [Find] from the shortcut menu. The trace data search dialog
appears.
Specify the address or frame number to be displayed. For details, refer to Section "4.4.8 Trace" in
"SOFTUNE Workbench Operation Manual".
● Using Command for Searching for Trace Data
1. Search for trace data.
- Execute the SEARCH TRACE command.
For details, refer to Section "4.37 SEARCH TRACE" in "SOFTUNE Workbench Command Reference
Manual".
Note:
Trace data can search only branching source address.
318