Operation In Performance Mode - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS
2.2.6.3

Operation in Performance Mode

Event triggers set in the performance mode are used to measure performance. The time
duration between two event occurrences can be measured and the event occurrences
can be counted.
■ Operation in Performance Mode
The event triggers that are set in the performance mode are used to measure performance. The time duration
between two event occurrences can be measured and the event occurrences can be counted.
SET EVENT
CANCEL EVENT
Enable
Events
Disable
ENABLE EVENT
SHOW EVENT
94
Figure 2.2-5 Operation in Performance Mode
Limited to following
combinations:
1,2 3,4 5,6 7,8
DISABLE EVENT CLEAR PERFORMANCE
SHOW PERFORMANCE/STATUS
SET PERFORMANCE
Buffer full break control
Performance measurement
SHOW PERFORMANCE
Instructing
MCU to
suspend
operation