Resources Used By Monitor Program; Required Resources - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS
2.7.1

Resources Used by Monitor Program

The monitor program of the monitor debugger uses the I/O resources listed below. The
target hardware must have these resources available for the monitor program.

■ Required Resources

The following resources are required to build the monitor program into the target hardware.
Table 2.7-1 Resources Used by Monitor Debugger
1
2
3
4
5
324
UART
Monitor ROM
Work RAM
External-interrupt switch
Timer
Necessary For communication with host computer
4800/9600/19200/38400 bps
Necessary Need about 10 KB (For details, refer to link map.)
Necessary Need about 2 KB (For details, refer to link map.)
Option Uses for forced abortion of program. When the
switch is not built-in, the program can stop at the
breakpoint only.
Option Uses for SET TIMER/SHOW TIMER . Needs 32 bits
in 1 μs units.