Removing The Microprocessor Airflow Shroud (Desktop Chassis); Replacing The Microprocessor Airflow Shroud (Desktop Chassis) - Dell Precision 330 Service Manual

Back to Contents Page
Microprocessor Airflow Shroud
Dell Precision™ WorkStation 330 Systems Service Manual
Desktop Chassis
Mini Tower Chassis
Desktop Chassis
Removing the microprocessor airflow shroud
l
Replacing the microprocessor airflow shroud
l

Removing the Microprocessor Airflow Shroud (Desktop Chassis)

CAUTION: Before you perform this procedure, see
NOTICE: Before disconnecting a peripheral from the system or removing a component from the system board, verify that the standby power indicator on the
system board has turned off. To locate this indicator, see
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then
2. Rotate the power supply away from the system board.
3. Remove the airflow shroud by lifting the shroud up until the anchor tabs disengage from the chassis frame (see the following figure).
4. Lift the airflow shroud out of the chassis.
Removing the Airflow Shroud (Desktop Chassis)

Replacing the Microprocessor Airflow Shroud (Desktop Chassis)

To replace the microprocessor airflow shroud, perform the
"Precautionary Measures."
"System Board Components" or
removal procedure in reverse.
"Interior Service Label."
remove the computer cover.