Installing The Cover; Removing The Microprocessor Air Baffle - Lenovo ThinkServer RD120 Hardware Maintenance Manual

5. If you are instructed to return the cover, follow all packaging instructions, and

Installing the cover

To install the cover, complete the following steps.
1. Make sure that all internal cables are correctly routed.
2. Place the cover-release latch in the open (up) position.
3. Insert the bottom tabs of the top cover into the matching slots in the server
4. Press down on the cover-release latch 1 to lock the cover in place.
5. Slide the server into the rack.

Removing the microprocessor air baffle

When you work with some optional devices, you must first remove the
microprocessor air baffle to access certain components or connectors on the
system board.
To remove the microprocessor air baffle, complete the following steps.
use any packaging materials for shipping that are supplied to you.
chassis.
Chapter 4. Removing and replacing server components
57