Lenovo ThinkServer RD120 Hardware Maintenance Manual page 100

10. Install the cover (see "Installing the cover" on page 57).
11. Slide the server into the rack.
12. Reconnect the external cables; then, reconnect the power cords and turn on
Installing a SCSI tape drive in a 3.5-inch model server
Install the tape drive in the two bottom-left hard disk drive bays. See the
documentation that comes with the enablement kit for the original tape drive for
instructions for mounting the tape drive on the tape-drive tray.
82
ThinkServer RD120 server Machine Types 6444, 6445, 6446, and 6447: Hardware Maintenance Manual
1
SATA tape cable connector
2
SATA tape cable
9. Install the fan-bracket assembly.
the peripheral devices and the server.
Attention: In a dc power environment, only trained service personnel other
than Lenovo service technicians are authorized to connect or disconnect power
to the dc power supply. See the documentation that comes with each dc power
supply.