Using Serveraid Manager - Lenovo ThinkServer RD120 Hardware Maintenance Manual

2. When the prompt <<< Press <CTRL><A> for IBM ServeRAID Configuration
3. To select a choice from the menu, use the arrow keys.
4. Use the arrow keys to select the channel for which you want to change settings.
5. To change the settings of the selected items, follow the instructions on the
IBM ServeRAID Configuration Utility menu choices: The following choices are
on the IBM ServeRAID Configuration Utility menu:
v Array Configuration Utility
v SerialSelect Utility
v Disk Utilities

Using ServeRAID Manager

Use ServeRAID Manager, which is on the ThinkServer Documentation DVD, to
perform the following tasks:
v Configure a redundant array of independent disks (RAID) array
v Erase all data from a hard disk drive and return the disk to the factory-default
v View the RAID configuration and associated devices
v Monitor the operation of the RAID controller
To perform some tasks, you can run ServeRAID Manager as an installed program.
However, to configure the RAID controller and perform an initial RAID configuration
on the server, you must run ServeRAID Manager in Startable CD mode, as
described in the instructions in this section.
See the ServeRAID documentation on the ThinkServer Documentation DVD for
additional information about RAID technology and instructions for using ServeRAID
Manager to configure the RAID controller. Additional information about ServeRAID
Manager is also available from the Help menu. For information about a specific
object in the ServeRAID Manager tree, select the object and click Actions --> Hints
and tips.
Configuring the RAID controller: By running ServeRAID Manager in Startable
CD mode, you can configure the RAID controller before you install the operating
system. The information in this section assumes that you are running ServeRAID
Manager in Startable CD mode.
To run ServeRAID Manager in Startable CD mode, turn on the server; then, insert
the CD into the CD-RW/DVD drive. If ServeRAID Manager detects an unconfigured
controller and ready drives, the Configuration wizard starts.
In the Configuration wizard, you can select express configuration or custom
configuration. Express configuration automatically configures the controller by
grouping the first two physical drives in the ServeRAID Manager tree into an array
22
ThinkServer RD120 server Machine Types 6444, 6445, 6446, and 6447: Hardware Maintenance Manual
Utility! >>> appears, press Ctrl+A. If you have set an administrator password,
you are prompted to type the password.
screen. Be sure to press Enter to save your changes.
Select this choice to create, manage, or delete arrays, or to initialize drives.
Select this choice to configure the controller interface definitions or to configure
the physical transfer and SAS address of the selected drive.
Select this choice to format a disk or verify the disk media. Select a device from
the list and read the instructions on the screen carefully before making a
selection.
settings