Step 2: System Setup
Turn on the unit and configure initial settings with the
Setup Wizard.
Turning On the Unit
Press the power switch to turn on the unit.
Power switch
POWER
NETWORK
1
2
3
HDD
The power LED on the front panel is lit green when the
unit is turned on.
When you turn on the unit for the first time, the Setup
Wizard starts automatically.
Continue to the following section, "Configuring Initial
Settings with Setup Wizard."
Notes
• The fan noise may be loud for about 2 seconds after
turning on the unit. This is not a malfunction.
• Turn on the peripheral devices before turning on the
unit.
6
Step 2: System Setup
1
2
3
4
STATUS
1
2
3
4
ERROR
REC
Configuring Initial Settings with
Setup Wizard
When you turn on the unit, the Setup Wizard starts after
the following screen appears.
↓
Click [Next].
↓
Read the user license agreement, click [Accept], and
then click [Next].
↓