To Install The 2Nd Hdd Accessory Module Support; To Disable Automatic Cd-Rom Detection - HP OmniBook 6000 - Notebook PC Evaluation Manual

4. Double-click on the W95y2k.exe
5. Click Yes to accept the license agreement.
6. When the installation is finished, click OK to restart the computer.
7. The installation of Internet Explorer will start when the Notebook restarts.

To install the 2nd HDD accessory module support

If you intend to use a 2nd HDD in the Module Bay, you will have to update the Windows
95 hard-disk driver. That update is located on the Recovery CD-ROM in the
\HP\DRIVERS\W95\PATCHES\ESDI_506.
1. Open a MS-DOS Prompt.
2. Copy the update from the Recovery CD to C:\WINDOWS\SYSTEM\IOSUBSYS:
COPY D:\HP\DRIVERS\W95\PATCHES\ESDI_506
C:\WINDOWS\SYSTEM\IOSUBSYS
Confirm with Y when you are prompted to overwrite the ESDI_506.PDR file.
3. Restart the computer.

To disable automatic CD-ROM detection

Windows 95 will automatically detect and respond when you insert a CD. However, this
prevents the HP Notebook from automatically turning off after a period of inactivity if
the CD-ROM drive is present. To disable this feature:
1. From Control Panel, double-click System, then click Device Manager.
2. Double-click CD-ROM drive.
3. Select the CD-ROM driver displayed, then click Properties.
4. Click Settings, then uncheck "Auto Insert Notification".
5. Click OK to close the CD-ROM Properties window.
6. Click OK to close the System Properties window.
7. Click Yes to restart Windows 95.
Using Windows 95
Installing Windows 95
Corporate Evaluator's Guide 125