7. A dialog box will appear prompting for the path of the installation files. Browse to
the location of the driver installation directory when prompted to do so.
8. Double-click Piixide.inf then click OK.
9. Click on "Intel PIIX PCI Bus Master IDE Controller" driver and then click OK.
10. When prompted, reboot the system as directed in order for the changes to take effect.
To install the Intel® SpeedStep™ Technology applet
If you've installed a retail version of Windows, you'll need to install the Intel®
SpeedStep™ technology Applet if you have a dual-speed Pentium III processor.
The Intel SpeedStep files are located on the Recovery CD under
\HP\DRIVERS\NT4\SPEEDSTP.
1. Double-click SETUP.EXE in the SpeedStep directory.
2. When prompted, click NEXT.
3. Click FINISH to reboot your computer.
Upon successful installation, a SpeedStep icon appears on the bottom right corner of the
taskbar.
To disable automatic CD-ROM detection
Windows NT 4.0 will automatically detect and respond when you insert a CD. However,
this prevents the HP Notebook from automatically turning off after a period of inactivity
if the CD-ROM drive is present. To disable this feature:
1. From Start Menu, click Run.
2. Enter REGEDT32 then click OK.
3. Select the HKEY_LOCAL_MACHINE window and go to
SYSTEM\CurrentControlSet\Services\Cdrom.
4. Double click on the Autorun key.
5. Enter 0 and click OK.
6. Close the Registry Editor and restart Windows NT 4.0.
Using Windows NT 4.0
Installing Windows NT 4.0
Corporate Evaluator's Guide
137