Table of Contents
Advertisement
The drivers will be installed after the system reboots.
To install pointing device support
If you've installed a retail version of Windows 2000, you can install pointing device
support.
The integrated pointing device(s) is fully supported by the Synaptics Touchpad driver.
With the standard PS/2 mouse driver the integrated pointing device(s) will function, but
will be without most special features.
The touchpad files are located on the Recovery CD under
\HP\DRIVERS\W2K\Touchpad.
1. Double-click SETUP.EXE in the Touchpad directory.
2. Follow the instructions on the screen.
For more detailed information about the touchpad drivers, see the readme.txt file in the
touchpad directory.
To install the Hewlett-Packard Configuration Interface (HPCI)
If you've installed a retail version of Windows 2000, you'll need to install the Hewlett-
Packard Configuration Interface (HPCI) driver. This driver is located on the Recovery
CD in \HP\DRIVERS\W2K\HPCI.
The HP Configuration Interface device implements the following features:
• Undock security using the physical undock button located on the front of the docking
station.
• Auto standby on undock based on the bios settings.
• Fn+F12 hibernate hot key.
• Volume implemented through the operating system which will actively be reflected in
the user interface.
1. Run SETUP.EXE in the HPCI directory on the Recovery CD.
2. Choose Install the HP Configuration Interface Software and click OK.
3. Click OK to confirm the software has been successfully installed.
Using Windows 2000
Installing Windows 2000
Corporate Evaluator's Guide
97
Advertisement
Table of Contents
Troubleshooting
