Using Plug-In Modules
CAUTION
Making Connections
Using Plug-In Modules
You can use any compatible plug-in module with your computer's module bay, such as:
• CD-ROM or DVD drive.
• Zip drive.
• CD read/write drive.
• Second hard drive.
• Floppy disk drive.
You can also attach the floppy disk drive to your computer's parallel port using the
external floppy drive cable.
• Secondary battery.
Never remove a plug-in module without first notifying Windows—see "To replace
a plug-in module" on page 55. Otherwise, you could lose data.
To install hot-swap support
If your computer uses Windows 95 or 98, it also includes the Agaté Tioman "hot-swap"
software that lets you disconnect most modules from the computer's plug-in bay without
needing to shut down and reboot the computer.
If a plug-in module icon is displayed in the taskbar, Agaté Tioman is already installed. If
the icon is not present, you can install the software as follows:
• Click Start, Programs, Agaté Tioman for HP, Setup, then follow the onscreen
instructions.
54
Corporate Evaluator's Guide