Removing A Plug-In Accessory Module (User-Replaceable); Figure 2-2. Removing A Plug-In Module - HP OmniBook 3000 Service Manual

Removing a Plug-In Accessory Module
(User-Replaceable)
The OmniBook is shipped with a floppy drive module installed in the plug-in slot. Other plug-in
accessories are available, including a CD-ROM drive and secondary battery.
Note
Plug-in accessory modules have no repairable components. A defective module must be
exchanged.
Required Equipment
• None.
Removal Procedure
1. Slide the safety latch for the plug-in slot into its recess.
2. Slide and hold the release latch, then slide out the module.
Reassembly Note
Caution
Be sure the safety latch is open before you insert the module. Otherwise, the release latch could
break if you force the module in.
• After installing the module, close the safety latch.
2-4 Removal and Replacement

Figure 2-2. Removing a Plug-In Module

HP OmniBook 3000