Installing HP/3Com 10/100 Ethernet+ 56K Global Modem Mini-PCI Card Support
Installing HP/3Com 10/100 Ethernet+ 56K Global Modem
Mini-PCI Card Support
This section describes how to:
• Install Ethernet support.
• Install modem support.
To install Ethernet support
If you have installed retail Windows and your HP Notebook contains a 3Com 10/100
Mini PCI Ethernet Adapter, you need to install the LAN drivers. The LAN drivers are
contained in the \HP\DRIVERS\W2K\LAN subdirectory.
1. Make sure that the 3Com network adapter is connected to the network.
2. Open the Device Manager: Right-click on My Computer and select Properties, click
3. Double-click "Ethernet Controller."
4. Click Reinstall Driver on the General tab.
5. Click Next.
6. Select "Display a list of the known drivers for this device so that I can choose a
7. Double-click "Network Adapters."
8. Click Have Disk and browse to \HP\Drivers\W2K\LAN
9. Click OK.
10. Select 3COM 10\100 Mini PCI Ethernet Adapter and click Next.
11. Click Yes.
12. Click Next.
13. Click Yes.
14. Click Finish.
15. Close the Device Properties and the Device Manager.
the Hardware tab, and then click the Device Manager button.
specific driver" and click Next.
Using Windows 2000
Corporate Evaluator's Guide
101