HP OmniBook 6000 - Notebook PC Evaluation Manual page 202

Specifications and Regulatory Information
Regulatory Information
International
Products sold internationally by Hewlett-Packard and its authorized dealers meet the
specifications listed below.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014)
Address: Hewlett-Packard Company
Mobile Computing Division
19310 Pruneridge Ave.
Cupertino, CA 95014
declares that the following product
Product name:
HP OmniBook 6000
Options: All
conforms to the following product specifications
Safety: IEC 950:1991+A1,A2,A3,A4 / EN 60950 (1992)+A1,A2,A3,A4,A11
GB4943-1995
IEC 825-1:1993 / EN 60825-1:1994, Class 1
EMC: CISPR 22:1993+A1,A2 / EN 55022 (1994)+A1,A2: Class B [1 ]
GB9254-1988
EN 50082-1:1992
FCC Title 47 CFR, Part 15 Class B
AS/NZS 3548:1995 Rules and Regulations of Class B
Supplementary The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and EMC
Directive 89/336/EEC and carries the CE mark accordingly.
Information:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The HP ac adapter used with this product is designed to operate on all power systems, other than IT power
systems.
[1] The product was tested in a typical configuration with Hewlett-Packard personal computer peripherals.
Quality Department,
Hewlett-Packard Company
Mobile Computing Division
202
IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD
IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m
IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines
Ansi C63.4:1992
Corporate Evaluator's Guide