HP OmniBook 6000 - Notebook PC Evaluation Manual page 105

3. Open the MS-DOS Prompt.
4. Go to the \HP\BOOTDISK directory on the Recovery CD. If D: is the drive letter of
your CD-ROM drive, type:
D:
CD \HP\BOOTDISK
5. Type MAKESUPP.
6. Enter A as the Floppy drive.
7. Enter Y to continue.
8. Press any key to continue.
9. Enter N when complete.
10. Close the MS-DOS Prompt.
11. Remove the Recovery CD from the CD-ROM drive.
12. Shutdown, and restart booting from the floppy disk.
13. Type FORMAT C: /Q /U.
14. Enter Y to format the C: drive.
15. Enter your desired Volume Label and press enter.
16. Insert the Recovery CD into the CD-ROM drive.
17. Type SYS C:.
18. Insert the Windows 98 Installation CD-ROM.
19. Type the following commands to copy the Windows 98 files to the C: drive.
C:
MD \WINDOWS
MD \WINDOWS\OPTIONS
MD \WINDOWS\OPTIONS\CABS
COPY A:\DOS\HIMEM.SYS C:\
COPY D:\WIN98\*.* C:\WINDOWS\OPTIONS\CABS
COPY CON C:\CONFIG.SYS
DEVICE=C:\HIMEM.SYS /MACHINE:2
Using Windows 98
Installing Windows 98
Corporate Evaluator's Guide 105