To Install Pointing Device Support; To Install Ide Support - HP OmniBook 6000 - Notebook PC Evaluation Manual

Note
Using Windows NT 4.0
Installing Windows NT 4.0
If your Notebook came with an ESS soft modem, SETUP.EXE will also install modem
drivers.
2. Follow the instructions on the screen to install the drivers.
The drivers will be installed after the system reboots.

To install pointing device support

If you've installed a retail version of Windows NT, you can install pointing device
support.
The integrated pointing device(s) is fully supported by the Synaptics Touchpad driver.
With the standard PS/2 mouse driver the integrated pointing device(s) will function, but
will be without most special features.
The touchpad files are located on the Recovery CD under
\HP\DRIVERS\NT4\Touchpad.
1. Run SETUP.EXE from the \HP\DRIVERS\NT4\Touchpad subdirectory.
2. Follow the instructions and restart to complete the installation.
For more detailed information about the touchpad drivers, see the readme.txt file in the
touchpad directory.

To install IDE support

Windows NT 4.0 installs a generic IDE Controller device driver. To increase
performance, install the Intel PIIX4 PCI Bus Master IDE Controller driver that's in the
\HP\DRIVERS\NT4\PIIX4 directory on the HP Notebook Recovery CD.
1. From the Control Panel, double-click on the "SCSI Adapters" icon.
2. Click on the folder tab labeled "Drivers". The currently installed SCSI adapter drivers
will be listed in the Drivers menu.
3. Select the default driver ("IDE CD-ROM (Atapi 1.2)/Dual-Channel PCI IDE") Then,
click on the "Remove" button to remove the driver.
4. Click Yes to Confirm.
5. Click "Add..." to add a new driver.
6. From the "Install Driver" dialog box, Click on the "Have Disk" button.
136 Corporate Evaluator's Guide