Roll Printing Is Selected, But Sheets Are Loaded; The Roll Is Empty; Sheet Printing Is Selected - Canon imagePROGRAF iPF755 User Manual

Roll printing is selected, but sheets are loaded.

Cause
A print job for rolls was received
when a sheet is loaded.

The roll is empty.

Cause
The roll is empty.
There is remaining
roll paper, but be-
cause it could not
be advanced, it
could not be detec-
ted.

Sheet printing is selected.

Cause
You have attempted to print a test print sheet or
other printer status information on a sheet, but no
sheet is loaded.
iPF755
Follow these steps to load and print on a roll.
1. Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the
sheet.
(See "Removing Sheets.")
2. Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the used roll with a new roll of the same type and size.
1. Press the Release Lever back and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2. Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
3. If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode
is not printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")
5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be
helpful to change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK
button. Load the sheet, and then print.
(See "Loading and Printing on Sheets.")
To print on rolls, follow these steps.
Error Message >
Corrective Action
→P.659
→P.630
Corrective Action
→P.636
→P.639
→P.626
→P.630
→P.633
→P.635
Corrective Action
Roll printing is selected, but sheets are loaded.
Messages regarding paper >
→P.54
→P.6
13
867