Canon imagePROGRAF iPF755 User Manual page 740

Printer Parts > Control Panel
Inter-
face
Setup
9
724
Menu Settings
>
Setting Item
TCP/ IPv4
Proto-
IP
col
IPv4
Set-
tings
DNS
Set-
tings
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS
Set-
tings
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
IP Address Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Subnet Mask
Default G/W
DNS Dync up- Specify whether DNS server registration is updated
date automatically.
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
DNS State- Specify whether DNS server registration is updated
Dync full automatically.
update Addr
State-
less
Addr
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Description, Instructions
iPF755