Canon imagePROGRAF iPF755 User Manual page 742

Printer Parts > Control Panel
System
Setup
9
726
Menu Settings
>
Setting Item
Keep Paper Size
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Description, Instructions
Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin set-
ting of the printer menu will be used instead of the
margin setting of the printer driver if the latter is
smaller, which may prevent text or images in the
margin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the
printer driver does not match the margin in the printer
menu
Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left on
the roll when the roll is left in the retracted position.
Specify On to have rolls cut when printing begins af-
ter Sleep mode or when the power is restored. Select-
ing Automatic will trim the edge when the roll has
been in the retracted position for two days or more.
Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead. (See "Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.).")
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Restores settings that you have changed with Media
Configuration Tool to the default values.
→P.665
iPF755