Canon imagePROGRAF iPF755 User Manual page 743

System
Erase High Speed
Setup
HDD
Data
Secure High Spd.
Secure
Output Print
Meth-
od
Print (Auto Del)
Save: Box 01
Print After Recv
Save: Shared Box
Show Job Log
Prep.MovePrinter
Ad- Change Password
min.
Menu
iPF755
Setting Item
Printer Parts
Description, Instructions
Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on the
Printer's Hard Disk.")
→P.744
Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.744
Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed
to check if the data was correctly written. (See
"Erasing Data on the Printer's Hard Disk.")
→P.744
Select the printing method for jobs received from
software other than the printer driver. When using the
printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.
Select Off to print without saving jobs in the box
shared among multiple users.
Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.")
→P.816
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
By setting a password, you can restrict menu display
and configuration as follows. You can input between
0 and 9999999.
• Viewing and configuration by administrators
only
IPv4 Settings
Change Password
Init.Admin.Pswd
Viewing and configuration
•
administrators, and only viewing by other
users
Interface Setup settings (except IPv4 Settings )
> Control Panel >
9
727
by
Menu Settings