Canon imagePROGRAF iPF755 User Manual page 142

Enhanced Printing Options
7.
Click the Page Setup tab to display the Page Setup sheet.
3
8.
O
Click Size Options to display the Paper Size Options dialog box.
9.
Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this example.
10.
Select mm in Units.
11.
Enter 430 (16.9 in) in both Width and Height.
12.
Click Add to register 430 mm Square.
13.
Click OK to close the Paper Size Options dialog box.
14.
Click Manual in the
126
15.
A
In the
16.
Confirm the print settings and print as desired.
Printing on Non-Standard Paper Sizes (Windows)
> Printing banners or at other non-standard sizes
Note
• If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
L
Paper Source list.
Page Size list, click the size you added, 430 mm Square.
Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows)
>
→P.205
"
iPF755