Canon imagePROGRAF iPF755 User Manual page 650

Handling Paper >
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper loaded ( Roll Paper or Cut Sheet ), and then press the OK button.
5.
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
7
Using the Same Type of Paper Regularly
Configure this setting so that current media type settings will be automatically selected when you load the same type of
paper later.
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
634
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.
Changing the Type of Paper
Handling rolls >
Note
• If the Tab Selection screen is not displayed, press the Menu button.
Note
• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
default, Plain Paper is selected.
• If you move the Release Lever, the setting automatically reverts to the previously selected paper.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause
feed errors and affect printing quality.
Note
• If the Tab Selection screen is not displayed, press the Menu button.
).
By
→P.620
).
iPF755