Canon imagePROGRAF iPF755 User Manual page 738

Printer Parts > Control Panel
GL2
Set-
tings
9
722
Menu Settings
>
Setting Item
Paper Auto Rotate
Man-
ager
Nest- Use Nesting
ing
Nesting WaitTime
Cut Lines
Line & Enable merge
Pen
Man-
ager
Pen Select Palette
Setup
Define Palette
Reset Palette
Smoothing
Description, Instructions
HP RTL print jobs are not rotated. Because HP RTL
images are not rotated even if the paper is rotated 90
degrees, images may be cut off or the blank paper
may be ejected. In this case, set Auto Rotate to Off.
Selecting On will store print jobs until multiple docu-
ments can be arranged to fill up the roll width, in-
stead of printing each print job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document
on the roll.
Specify whether to merge or print over colors where
lines overlap.
Choose Off to print the second line over the first.
Choose On to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette
B, or Factory.
Choose Software to print according to software set-
tings. Choose Palette A or Palette B to print using
the value specified in Define Palette.
Specify the Width, Color, and Line Attributes in
the palette Pen no.. Choose Factory to confirm the
values when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Set-
ting as the processing for the ends and junctions of
lines.
If you choose No Setting
•
If you choose Circle Setting
•
Restore Define Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines
or as multiple connected line segments.
iPF755