Table of Contents
Advertisement
2.
Remove the subwoofer (2) from the base enclosure.
NOTE:
performance of the subwoofer.
Reverse this procedure to install the subwoofer.
Power connector cable
Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
88
Chapter 4 Removal and replacement procedures
The subwoofer includes two rubber isolators (3). These isolators are crucial to the
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
47), and then remove the following components:
48)
52)
56)
65)
Spare part number
686900-001
Advertisement
Table of Contents
