Table of Contents
Advertisement
Reverse this procedure to install the USB board.
Subwoofer
Description
Subwoofer (includes cables and 2 rubber isolators)
Before removing the subwoofer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
e.
Speakers (see
f.
USB board (see
Remove the subwoofer:
1.
Remove the two Phillips PM2.0×2.0 broad head screws (1) that secure the subwoofer to the
base enclosure.
Battery on page
47), and then remove the following components:
Hard drive on page
48)
Optical drive on page
Keyboard on page
56)
Top cover on page
65)
Speakers on page
84)
USB board on page
86)
52)
Component replacement procedures
Spare part number
686926-001
87
Advertisement
Table of Contents
