Optical drive
Description
DVD±RW Double-Layer with SuperMulti Drive (includes optical drive bezel and optical drive
bracket)
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the optical drive:
1.
Remove the Phillips PM2.5×3.5 screw (1) that secures the optical drive the computer.
2.
Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release
the optical drive.
52
Chapter 4 Removal and replacement procedures
Battery on page
47).
Hard drive on page
48).
Spare part number
686916-001