Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the power button board:
1.
Detach the power button board cable from the top cover. (The power button board cable is
attached to the top cover with double-sided tape.)
2.
Turn the top cover upside down, with the front toward you.
3.
Remove the two Phillips PM2.5×3.5 screws (1) that secure the power button board to the
top cover.
Battery on page
47), and then remove the following components:
Hard drive on page
48)
Optical drive on page
Keyboard on page
56)
Top cover on page
65)
52)
Component replacement procedures
Spare part number
686917-001
69