Table of Contents
Advertisement
Optical drive
Description
DVD+/-RW Double-Layer SuperMulti Drive
Optical drive bracket
Optical drive bezel
Pike/natural silver
Silk gold
Smoke gray
Marine blue
Jack black
Snow white
Empress red
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
To remove the optical drive:
1.
Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2.
Remove the optical drive (2) by sliding it out of the optical drive bay.
Battery on page
32).
Spare part number
920417-001
925353-001
925340-001
925341-001
925338-001
925339-001
925336-001
925337-001
925658-001
Component replacement procedures
33
Advertisement
Table of Contents
