Optical Drive - HP OMEN 17-w001 through 17-w099 Maintenance And Service Manual

Optical drive

Description
Optical drive
● DVD+/-RW Double-Layer SuperMulti
● Blu-ray Disc R/RW with SuperMulti
Optical drive bezel
IMPORTANT:
and replacement.
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices connected to the computer.
4. Remove the battery (see
Remove the optical drive:
1. Remove the Phillips M2.0 x 2.5 screw (1) securing the optical drive in the computer, and then slide drive
(2) away from the computer.
2. If it is necessary to disassemble the optical drive, perform the following steps:
a. Remove the M2.0 x 2.5 screw (1) that secures the optical drive bracket to the optical drive, and
then remove the bracket (2) from the optical drive.
Make special note of each screw and screw lock size and location during removal
Battery on page 34).
Component replacement procedures
Spare part number
756564-038
729050-011
862962-001
35