Table of Contents
Advertisement
Optical drive
NOTE:
Optical drive spare part kits include bracket and bezel.
Description
DVD+/-RW Double-Layer SuperMulti Drive for use in HP Notebook models (includes bracket and bezel)
DVD+/-RW Double-Layer SuperMulti Drive for use in HP 240/246 G4 Notebook models (includes bracket
and bezel)
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
To remove the optical drive:
1.
Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2.
Remove the optical drive (2) by sliding it out of the optical drive bay.
Reverse this procedure to reassemble and install the optical drive.
Battery on page
28).
Spare part number
813514-001
818147-001
Component replacement procedures
29
Advertisement
Table of Contents
