Stamping Originals - Canon imageCLASS MF7280 Sending Manual

5
Press
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The document is stored in memory, and then sent to the specified destination at
the specified time.
NOTE
To cancel a delayed send job, press [Send Settings] ➞ [Delayed Send] ➞ [Cancel].
•
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
• You can also cancel a delayed send job from the System Monitor screen. (See
"Using the System Monitor Screen," on p. 1-42.)

Stamping Originals

The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front
side of scanned and sent originals.
ABC
Vertical Placement
IMPORTANT
The Stamp mode cannot be used with the Document Size or Different Size Originals
mode.
(Start).
(Start) once for each original. When scanning
Position at
which stamp
is applied.
ABC
Position at
which stamp
is applied.
Horizontal Placement
Sending Methods
4
4-25