Gamma Value For Color Send Jobs - Canon imageCLASS MF7280 Sending Manual

Gamma Value for Color Send Jobs

You can set the gamma value for color scanned data. If the set value corresponds
to the gamma value at the recipient's machine, the scan exposure of the output
data at the recipient's machine is automatically adjusted to the level best suited to
the quality of the original. Gamma values are expressed as input-output
characteristics. Output is darkened when the gamma value is increased, and it is
lightened when the gamma value is decreased. If the density of images received at
the destination is excessively light or dark, the gamma value can be changed
before resending the images.
NOTE
• If you are sending documents by fax, this setting is disabled.
•
The default setting is 'Gamma 1.8'.
1
Press
➞ [TX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Data Compression Ratio
for Color Send Jobs," on p. 7-4.
2
Press [Gamma Value for Color Send Jobs].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
(Additional Functions) ➞ [Communications Settings]

Gamma Value for Color Send Jobs

7
7-21