Canon imageCLASS MF7280 Sending Manual page 140

2
4
3
4-32
Job Recall
Select [1 Before], [2 Before], or [3 Before] ➞ confirm the
settings ➞ press [OK].
The display returns to the Send Basic Features screen.
NOTE
•
If there are more stored Send settings than are currently displayed, you can scroll
through the list by pressing [▼] or [▲].
• You can change the settings for a recalled send job.
• If there are multiple destinations stored in Recall memory, the order of the
destinations shown in the list may not correspond to the order in which they were
specified.
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
(Start) once for each original. When scanning