Using The New Address Tab; Specifying An E-Mail Address - Canon imageCLASS MF7280 Sending Manual

Using the New Address Tab

This section describes the procedure for specifying a new destination that has not
been stored in the Address Book.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On', you cannot specify a destination using the New Address tab. (See "Restricting
Access to Destinations," on p. 9-36.)
NOTE
•
If you frequently send documents to the same destinations, store these destinations in
the Address Book beforehand. (See "Storing New Addresses," on p. 8-5.)
• You can specify only one destination at a time using the New Address tab.
• You can specify fax numbers, e-mail addresses, I-fax addresses, and file server
addresses.
•
For detailed procedure to specify a fax number using the New Address tab, see
Chapter 2, "Send and Receive Methods," in the Facsimile Guide.

Specifying an E-Mail Address

This mode enables you to specify a new e-mail address. You can enter an e-mail
address directly from the keyboard on the touch panel display.
NOTE
If you send a document via e-mail, the document is sent as a file attached to the e-mail
message in the Color or B&W mode.
1
Press [New Address] ➞ [E-mail].
Specifying Destinations
2
2-5