❑
Select the forwarding condition ➞ press [Set.].
❑
Enter the forwarding criteria ➞ press [OK].
❑
If necessary, repeat this step for the other drop-down list(s).
If you want to change the criteria for the forwarding conditions without
changing the forwarding condition for the Destination, From, and Subject
drop-down lists, press [Set.] next to the criteria you want to change ➞ enter
the new criteria ➞ press [OK].
❑
Press [OK].
The forwarding conditions are set, and the display returns to the Register
screen.
NOTE
•
If [disregarded] is selected as the forwarding condition, you cannot enter any
criteria.
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
You can enter up to 120 characters for the Destination, and 128 characters for the
From or Subject forwarding criteria.
9-21
Forwarding Settings
9