Operator Panel Menus; Network Menu - Dell 1720 - Vostro - Core 2 Duo 2.2 GHz User Manual

Operator Panel Menus

Network Menu

Parallel Menu
Setup Menu
USB Menu
Utilities Menu
Menus are represented by Ready
Paper Jam light sequences. Menu items and their settings are indicated by Error
Press the Cancel button
Press the Continue button
Press and hold the Continue button
Press and hold the Cancel button
Turn off the printer to exit the menus.
Network Menu
Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or
Network Opt <x>).
From this You can:
menu:
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
Off
On*
MAC Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Off—the printer filters PostScript print jobs using standard protocol.
On—the printer processes raw binary PostScript print jobs from computers using the Macintosh
operating system.
NOTE:
Auto*—the printer processes print jobs from computers using either Windows or Macintosh
operating systems.
Set Card Speed Automatically detect the connection speed of your network. You can disable this setting to set the
speed manually.
Auto*—the printer attempts to connect to the network at the current network speed.
10 Mbps, Half Duplex—the printer attempts to connect to the network at 10 Mbps, Half Duplex.
10 Mbps, Full Duplex—the printer attempts to connect to the network at 10 Mbps, Full Duplex.
100 Mbps, Half Duplex—the printer attempts to connect to the network at 100 Mbps, Half Duplex.
100 Mbps, Full Duplex—the printer attempts to connect to the network at 100 Mbps, Full Duplex.
* Factory default setting
, Toner Low/Replace Drum
to advance through the menus and menu items.
to advance to the setting you need.
until all the lights cycle to save a setting.
until all of the lights cycle to return to the Home menu.
This setting can cause print jobs sent from Windows to fail.
/ , Load Paper/Remove Output
and Continue
/ , and
light sequences.