Paper Guidelines For The Adf - Dell 962 All In One Photo Printer User Manual

75 sheets of photo,
coated, or glossy paper
25 iron-on transfers
75 transparencies
35 sheets of labels
150 sheets of custom
size paper
150 sheets of letterhead
paper

Paper Guidelines for the ADF

The glossy or coated side of the paper faces down.
The paper is centered in the paper support.
You select Normal or Photo print quality.
The paper guides rest against the right and left edges of the paper.
The paper guide rests against the bottom edge of the paper.
You follow the loading instructions on the iron-on transfer packaging.
The print side of the transfer faces down.
The paper guides rest against the right and left edges of the paper.
The paper guide rests against the bottom edge of the paper.
The transfers are centered in the paper support.
You select Normal or Photo print quality.
The rough side of the transparencies faces down.
The paper guides rest against the right and left edges of the
transparencies.
The paper guide rests against the bottom edge of the paper.
NOTE: You can load a single transparency into the paper support without
removing plain paper.
You select Normal or Photo print quality.
The transparencies are centered in the paper support.
The print side of the labels faces down into the paper support.
The top of the labels feeds into the printer first.
The paper guides rest against the right and left edges of the paper.
The paper guide rests against the bottom edge of the paper.
The print side of the paper faces down.
Your paper fits within these dimensions:
Width
76-216 mm
3.0-8.5 inches
Length
127-432 mm
5.0-17.0 inches
The paper is centered in the paper support.
The paper guides rest against the right and left edges of the paper.
The paper guide rests against the bottom edge of the paper.
The front of the letterhead faces down.
The top of the letterhead feeds into the printer first.
The paper guides rest against the right and left edges of the paper.
The paper guide rests against the bottom edge of the paper.