Oki MC780f User Manual page 168

8.[Administration] Tab Page
[Create SNMP V3 User Information] screen
You can display this screen by clicking the [New] button in the Create SNMP V3 User Information page.
1
2
3
4
5
6
7
Clicking [Save] on the [Create SNMP V3 User Information] screen instantly registers the SNMP V3 user information,
enabling the registered user to access this equipment via SNMP over a network.
Item name
1 Context Name
2 User Name
3 Authentication Protocol
4 Authentication Password
5 Privacy Protocol
6 Privacy Password
7 Permissions Level
Displays the context name.
Enter the user name. You can enter up to 31 alphanumerical characters and symbols.
Select an authentication protocol.
HMAC-MD5 — Select this to use HMAC-MD5.
HMAC-SHA — Select this to use HMAC-SHA.
Enter the password when the Authentication option is enabled. You can enter up to 31
characters.
Select a protocol for data encryption.
None — Select this not to encrypt data.
CBC-DES — Select this to use CBC-DES.
CFB-AES-128 — Select this to use AES-128 (CFB mode).
Enter the password for the user information. You can enter up to 31 alphanumerical
characters and symbols.
Select the access permission level of the SNMP V3 user.
General User — Select this to permit only the reading of data.
Administrator — Select this to permit both the reading and writing of data.
8 [Administration] Tab Page
Description
[Setup] Item List 167