Oki MC780f User Manual page 148

8.[Administration] Tab Page
Setting up IPv6
You can set the IPv6 protocol to enable the communication over IPv6.
1
2
3
4
5
6
Item name
1 Enable IPv6
2 LLMNR
3 Link Local Address
4 Manual
When [Manual] is selected, a stateful address cannot be set.
If the selected IPv6 address is already assigned, DAD (Duplicate Address Detection) detects it and notifies you on the
touch panel of this equipment.
Select whether the IPv6 protocol is enabled or disabled. [Disable] is set as the default.
If IPv6 is enabled, select whether LLMNR is enabled or disabled. [Disable] is set as the
default.
The automatically generated unique IP Address used for the IPv6 is displayed.
You assign the IPv6 address, prefix and default gateway manually. In this mode, you can
assign one IPv6 address to this equipment.
IP Address — Assign the IPv6 address for this equipment. Specify within the range from
1:1:1:1:1:1:1:1 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff.
Prefix Length — Assign the prefix length for the IPv6 address. Specify within the range
from 0 to 128. "0" is set as the default.
Gateway — Assign the default gateway address. Specify within the range from
1:1:1:1:1:1:1:1 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff.
Use DHCPv6 Server for options — Select this check box to use the optional information
(IPv6 address for the DNS server, etc.) which is issued from the DHCPv6 server.
8 [Administration] Tab Page
Description
[Setup] Item List 147