Oki MC780f User Manual page 154

8.[Administration] Tab Page
1
2
3
4
5
6
7
8
9
Item name
1 Enable DDNS
2 Domain Name
When the [Obtain a Domain Name automatically] option is enabled in the TCP/IP settings, the domain name can be obtained
using the DHCP server.
P.143 "Setting up TCP/IP"
3 Security Method
4 Primary Login Name
5 Primary Password
6 Secondary Login Name
7 Secondary Password
8 TSIG/SIG(0) Key file
Select whether the dynamic DNS service is enabled or disabled. [Enable] is set as the
default.
Enter the domain name that will be added to the DNS server using DDNS. You can enter up
to 96 alphanumerical characters and symbols other than =, ; (semicolon), #, and \
(backslash).
Enter the security method.
None
Select this to perform a non-secure DDNS update.
GSS-TSIG
Select this to perform a secure DDNS session using GSS-TSIG. You must set a log-in
name and a password. If both are not set, the secure DDNS session will not be
available.
TSIG
Select this to perform a secure DDNS session using TSIG. To select this, you must
upload a key file and a private key file. If any of them is not uploaded, the security
setting will be disabled.
SIG(0)
Select this to perform a secure DDNS session using SIG(0). To select this, you must
upload a key file and a private key file. If any of them is not uploaded, the security
setting will be disabled.
Enter the primary login name if the security method selected in the above setting is GSS-
TSIG. You can enter up to 128 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash).
Enter the primary password if the security method selected in the above setting is GSS-
TSIG. You can enter up to 128 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash).
Enter the secondary login name if the security method selected in the above setting is GSS-
TSIG. You can enter up to 128 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash).
Enter the secondary password if the security method selected in the above setting is GSS-
TSIG. You can enter up to 128 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash).
Use this setting to upload or delete a key file to be used for TSIG and SIG(0).
To upload it, click [Browse..] and specify a private key file to be uploaded, and then click
[Upload].
To delete it, click [Delete].
8 [Administration] Tab Page
Description
[Setup] Item List 153