NEC Express5800/320Fd-LR User Manual page 103

Disable Auto Reinstallation of CPU Module
You can disable the auto reinstallation of CPU module with the following configuration. You can
shift the timing of no communication that occurs during the installation process of CPU module by
disabling the auto reinstallation of CPU module and manually enabling the installation of the
module.
[Tips]
Auto reinstallation of CPU module is enabled by default.
Even if auto reinstallation of CPU is disabled, the installation process occurs only when the system
is starting up by a reboot.
[Caution]
This configuration just shifts the timing of the connectio timeout and does neither control nor avoid
the timeout. Furthermore, this configuration does not prevent no communication timeout from
occurring.
You need to configure this as a root user.
Disable auto reinstallation of CPU module
1.
Confirm auto reinstallation of CPU module is enabled
# /opt/ft/bin/ftsmaint bringupPolicy list
CPU bringup policy is enabled.
2. Disable auto reinstallation of CPU module
# /opt/ft/bin/ftsmaint bringupPolicy defer
Successfully deferred cpuBringupPolicy.
3. Confirm auto reinstallation of CPU module is disabled.
# /opt/ft/bin/ftsmaint bringupPolicy list
CPU bringup policy is deferred.
Procedures after Completion of Installation 5-11