About This User's Guide; How To Use This User's Guide; Additional Symbols; About Our Web Service - NEC Express5800/320Fd-LR User Manual

About This User's Guide

This User's Guide helps a user to properly setup and use the product. Consult this guide when you
set up the product.
Keep this manual and the separate volume of User's Guide handy.
This User's Guide is intended for users who have a good knowledge on the basic use of VMware
ESX Server and general I/O devices such as a keyboard and mouse.

How to Use This User's Guide

This guide explains the procedures you should perform before you begin system operation after you
purchased the product. Read the guide in order from Chapter 1. If you perform procedures
according to this guide, you will set up the product properly.
Chapter 4 describes how to install the operating system. Chapter 5 describes post-installation
procedures. Chapter 6 explains how to troubleshoot if you cannot set up the product properly. Refer
to "SYSTEM REPAIR" on page 6-2 for details about system configurations and repairs of this
product. Refer to "TROUBLESHOOTING" on page 6-13 if you feel you failed to set up the
product.
See this User's Guide for details of this product's operation, and functions and operations of the
hardware and the system.

Additional Symbols

The following symbols are used throughout this User's Guide in addition to the caution symbols
described at the beginning.
IMPORTANT:
CHECK:
TIPS:

About our Web Service

Information on NEC Express5800/ft series including modification modules is also available on our
web site, NEC Express5800 Web Site Asia Pacific:
http://www.nec.co.jp/express/index.html
Important points or instructions to keep in mind when using the
server or software
Something you need to make sure when using the server or
software
Helpful information, something useful to know
iii